No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Huawei SAP HANA Appliance Single Node Installation Guide (RH5885H and RH8100 V3+Broadwell+SLES) 12
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparations

Preparations

  1. Connect a PC to the management network port on the server through a network cable. Check that IP addresses of the management network port on the server and the PC are on the same network segment. Open Internet Explorer, enter the iBMC IP address (default: 192.168.2.100) in the address box.

    The IP address of the PC must be on the same network segment as that of the iBMC network port, and have the same subnet mask and gateway.

  2. On the iBMC login page, enter the default user name (root) and password (Huawei12#$).

    Type in English. Otherwise, character "$" may change to "¥" in Chinese or other characters in other languages. Click Log In.

    The iBMC supports both English and Chinese. You can choose a language as required.

  3. Click Remote on the menu bar, and then click Remote Virtual Console (Shared Mode) in the right pane.

    The remote virtual console is displayed.

    The operations for configuring the BIOS are performed on the console.

    The remote virtual console requires JRE 1.6.0 U25 or later. You can download the Java running environment at http://www.java.com.

    If the server is not powered on, choose Power On from the drop-down list.

    If the server has been powered on, choose Cold Reset from the drop-down list.

Translation
Download
Updated: 2020-03-20

Document ID: EDOC1100017252

Views: 43677

Downloads: 124

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next