No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Huawei SAP HANA Appliance Single Node Installation Guide (RH5885H and RH8100 V3+Broadwell+SLES) 12
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing the Host Name

Changing the Host Name

If a database needs to be uninstalled, you need to uninstall it before changing the host name. Otherwise, the uninstallation will fail.

  1. Run the vim /etc/hostname command to open the hostname file, enter e to enter the editing mode, and change the host name to hw00001.
  2. Enter :wq to save the setting and exit.
  3. Run the hostname hw00001 command.
  4. Run the following commands for the setting to take effect.

    /etc/rc.d/boot.local stop
    /etc/rc.d/boot.local start

Updated: 2020-03-20

Document ID: EDOC1100017252

Views: 44479

Downloads: 126

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next