No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Huawei SAP HANA Appliance Single Node Installation Guide (RH5885H and RH8100 V3+Broadwell+SLES) 12
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating and Formatting an LVM

Creating and Formatting an LVM

  1. Run the pvcreate /dev/nvme0n1 /dev/nvme1n1 command to create a physical volume.

  1. Run the pvs command to check the new physical volume.

  1. Run the vgcreate vg_log /dev/nvme0n1 /dev/nvme1n1 command to create a virtual volume group.

  1. Run the vgs command to check the new virtual volume group.

  1. Run the lvcreate --type raid1 -m 1 -L 1T -n lv_log vg_log command to create a logical volume. (Determine the size of the logical volume and ensure that its size does not exceed 45% that of the volume group.

  1. Run the lvs command to check the new logical volume.

  1. Run the mkfs.xfs -K -f /dev/mapper/vg_log-lv_log command to format the logical volume.
Translation
Download
Updated: 2020-03-20

Document ID: EDOC1100017252

Views: 43700

Downloads: 124

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next