No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Huawei SAP HANA Appliance Single Node Installation Guide (RH5885H and RH8100 V3+Broadwell+SLES) 12
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparations

Preparations

  1. Select an installation mode.

    You can install the OS using the physical or virtual DVD-ROM drive.

    • Open the remote virtual console. For details, see Preparations. Mount the OS image to the virtual DVD-ROM drive.
    • Insert the DVD into the physical DVD-ROM drive on the server (only when the server is started).

    To ensure that the first boot option of the system is a DVD, perform the following operations in this section. If the first boot option of the system has been set to a DVD, go to section Installing the OS.

  2. Reestart the system and go to the BIOS setup screen. For detail, see step 1 ~ step 2 in Configuring BIOS Parameters.

  3. On the Boot tab screen, select Boot Option #1 and press Enter.

  4. In the displayed dialog box, select the option starting with CDROM or DVDROM, press Enter, and then press Esc.

  5. Press F10. In the displayed dialog box, select Yes and press Enter.

Translation
Download
Updated: 2020-03-20

Document ID: EDOC1100017252

Views: 43994

Downloads: 124

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next