No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Huawei SAP HANA Appliance Single Node Installation Guide (RH5885H and RH8100 V3+Broadwell+SLES) 12
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Automatic Mounting

Configuring Automatic Mounting

  1. Run the vi /etc/rc.d/after.local command.

    This step uses SLES 12 SP1 as an example. Run the vi /etc/rc.d/boot.local command for SLES 11 SP4.

  2. Enter i, go to the last line, and enter

    mount /dev/mapper/vg_log-lv_log /hana/log.

  3. Press Esc, enter :wq, and press Enter to save the information.

Updated: 2020-03-20

Document ID: EDOC1100017252

Views: 43748

Downloads: 124

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next