No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Huawei SAP HANA Appliance Single Node Installation Guide (RH5885H and RH8100 V3+Broadwell+SLES) 12
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Driver Installation

Verifying the Driver Installation

You can perform the operations using the remote virtual console on the iBMC WebUI or using PuTTY. This following uses PuTTY as an example.

If the server uses ES3000 V3 NVMe PCIe SSD card, you are advised to use the ES3000 driver integrated in the OS. If the server uses ES3000 V2 NVMe PCIe SSD card, You are advised to use the ES3000 driver provided by Huawei.

  1. Log in to the server as user root.
  2. Run the fdisk -l command to check the space of NVMe SSD cards (nvme0n1 and nvme1n1).
Updated: 2020-03-20

Document ID: EDOC1100017252

Views: 44096

Downloads: 124

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next