No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Huawei SAP HANA Appliance Single Node Installation Guide (RH5885H and RH8100 V3+Broadwell+SLES) 12
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring GRUB Parameters

Configuring GRUB Parameters

  1. Log in to the OS as user root.
  2. Run the vi /etc/default/grub command.

  3. Add transparent_hugepage=never intel_idle.max_cstate=1 processor.max_cstate=1 nohz=off before showopts; in line GRUB_CMDLINE_LINUX_DEFAUL.

  4. Press Esc, enter :wq, and press Enter to save the information.

  5. Run the grub2-mkconfig -o /boot/grub2/grub.cfg command to generate the GRUB configuration file.

Translation
Download
Updated: 2020-03-20

Document ID: EDOC1100017252

Views: 44047

Downloads: 124

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next