No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 Smart Provisioning User Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing for the Installation

Preparing for the Installation

Before you install an OS by using Smart Provisioning, make preparations as follows:

  • Obtain a PC running Windows. This PC is used to access the server.
  • Log in to Server Compatibility Checker to check whether the current configuration of the server supports the OS to be installed.
NOTICE:
  • When you use Smart Provisioning to install an OS, you must install the OS on the boot disk.
  • Back up data on a hard disk before you install an OS on the disk using Smart Provisioning because the hard disk will be formatted during installation.
  • When installing an OS in Legacy mode, use a hard disk with a capacity less than 2 TB.
  • When you use Smart Provisioning to install an OS, if there are multiple RAID controller cards in the current environment, you cannot install OSs on different RAID controller cards.
Translation
Download
Updated: 2018-06-20

Document ID: EDOC1100018400

Views: 3620

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next