No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 Smart Provisioning User Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Windows Server OS in Customized Mode

Installing a Windows Server OS in Customized Mode

Install a Windows Server OS on a server by using Smart Provisioning in customized mode. In the following operations, Windows Server 2016 and the BIOS Legacy node are used as an example.

  1. Log in to Smart Provisioning. For details, see Logging In to Smart Provisioning.

    The Smart Provisioning main window is displayed, as shown in Figure 3-12.

    Figure 3-12 Smart Provisioning main window

  2. In the Smart Provisioning main window, click Deploy OS.

    The OS deployment main window is displayed, as shown in Figure 3-13.

    Figure 3-13 OS deployment main window

  3. Select Customized Mode and the OS version to be installed, and click Next.

    NOTE:

    The selected OS version must be the same as that in the installation DVD-ROM or ISO image file.

    The Select Disk window is displayed, as shown in Figure 3-14.
    Figure 3-14 Select Disk
    NOTE:
    • During the installation process, Smart Provisioning sets the selected hard disk to the boot disk.
    • After an installation hard disk is selected, record the value of Size. This value will be used in Step 11.

  4. Select an installation hard disk and click Next.

    The configuration summary window is displayed, as shown in Figure 3-15.

    Figure 3-15 Viewing the configuration summary

  5. Confirm that the information is correct and click Next.

    The window prompting you to insert the OS medium is displayed, as shown in Figure 3-16.

    Figure 3-16 Window prompting you to insert the OS medium

  6. Insert the OS medium.

    1. Select the medium of the OS to be installed.
      • If you use the OS DVD-ROM, insert the DVD-ROM of the OS to be installed into the DVD-ROM drive.
      • If you use the OS image file, perform 6.b to 6.f.
    2. Click on the toolbar of the Remote Virtual Console.

      The virtual DVD-ROM drive dialog box is displayed, as shown in Figure 3-17.

      Figure 3-17 Virtual DVD-ROM drive
    3. Select Image File.
    4. Click Browse.

      The Open dialog box is displayed.

    5. Select the ISO image file of the OS to be installed, and click Open.
    6. In the virtual DVD-ROM drive dialog box, click Connect.

      When Connect changes to Disconnect, the ISO image file of the OS is successfully loaded.

  7. Click Next.

    The OS installation starts, as shown in Figure 3-18.

    Figure 3-18 Starting the installation

    After the OS installation starts, the server restarts automatically. After the server restart is complete, the server downloads the system configuration file automatically, as shown in Figure 3-19.

    Figure 3-19 Downloading the system configuration file

    After the system configuration file is downloaded, the window for setting the OS language, time zone, and keyboard is displayed, as shown in Figure 3-20.

    Figure 3-20 Setting the OS language, time zone, and keyboard

  8. Set the OS language, time zone, and keyboard, and click Next.

    The OS version selection window is displayed, as shown in Figure 3-21.

    Figure 3-21 Selecting an OS version

  9. Select an OS version and click Next.

    The license window is displayed, as shown in Figure 3-22.

    Figure 3-22 License window

  10. Select I accept the license terms, and click Next.

    The hard disk partition selection window is displayed, as shown in Figure 3-23.

    Figure 3-23 Selecting a hard disk partition

  11. Select a hard disk of which the size is the same as that of the hard disk selected in Step 4, and click New to create partitions (at least one partition needs to be created).

    Create a system partition, as shown in Figure 3-24.

    Figure 3-24 Creating a system partition

  12. Enter the size of the system partition, and click Apply.

    The system partition is created, as shown in Figure 3-25.

    Figure 3-25 System partition created

  13. Select the partition of the Primary type created in the preceding Step 12, and click Next.

    The OS installation starts, as shown in Figure 3-26.

    Figure 3-26 Installing the OS

    After the OS is installed, the server automatically restarts. After the server restarts, the window for setting an OS password is displayed, as shown in Figure 3-27.

    Figure 3-27 Setting an OS password
    NOTE:

    The password contains at least six characters.

  14. Set an OS password, and click Finish.

    The windows OS page is displayed, as shown in Figure 3-28.
    Figure 3-28 Windows OS

  15. Press Ctrl+Alt+Delete and enter a user name and password to log in to the OS.
Translation
Download
Updated: 2018-06-20

Document ID: EDOC1100018400

Views: 3635

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next