No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 Smart Provisioning User Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a SLES OS in Customized Mode

Installing a SLES OS in Customized Mode

Install a SLES OS on a server by using Smart Provisioning in customized mode. In the following operations, SLES 12.3 and the BIOS UEFI node are used as an example.

  1. Log in to Smart Provisioning. For details, see Logging In to Smart Provisioning.

    The Smart Provisioning main window is displayed, as shown in Figure 3-42.

    Figure 3-42 Smart Provisioning main window

  2. In the Smart Provisioning main window, click Deploy OS.

    The OS deployment main window is displayed, as shown in Figure 3-43.

    Figure 3-43 OS deployment main window

  3. Select Customized Mode and the OS version to be installed, and click Next.

    NOTE:

    The selected OS version must be the same as that in the installation DVD-ROM or ISO image file.

    The Select Disk window is displayed, as shown in Figure 3-44.
    Figure 3-44 Select Disk
    NOTE:
    • During the installation process, Smart Provisioning sets the selected hard disk to the boot disk.
    • After an installation hard disk is selected, record the value of WWID. This value will be used in Step 10.

  4. Select an installation hard disk and click Next.

    The configuration summary window is displayed, as shown in Figure 3-45.

    Figure 3-45 Viewing the configuration summary

  5. Confirm that the information is correct and click Next.

    The window prompting you to insert the OS medium is displayed, as shown in Figure 3-46.

    Figure 3-46 Window prompting you to insert the OS medium

  6. Insert the OS medium.

    1. Select the medium of the OS to be installed.
      • If you use the OS DVD-ROM, insert the DVD-ROM of the OS to be installed into the DVD-ROM drive.
      • If you use the OS image file, perform 6.b to 6.f.
    2. Click on the toolbar of the Remote Virtual Console.

      The virtual DVD-ROM drive dialog box is displayed, as shown in Figure 3-47.

      Figure 3-47 Virtual DVD-ROM drive
    3. Select Image File.
    4. Click Browse.

      The Open dialog box is displayed.

    5. Select the ISO image file of the OS to be installed, and click Open.
    6. In the virtual DVD-ROM drive dialog box, click Connect.

      When Connect changes to Disconnect, the ISO image file of the OS is successfully loaded.

  7. Click Next.

    The OS installation starts, as shown in Figure 3-48.

    Figure 3-48 Starting the installation

    After the OS installation starts, the server restarts automatically. After the server restart is complete, the system initialization starts automatically, as shown in Figure 3-49.

    Figure 3-49 Initializing the system

    After the initialization is complete, the window for setting the password of user root is displayed, as shown in Figure 3-50.

    Figure 3-50 Setting the password of user root
    NOTE:

    The password must contain at least six characters.

  8. Set the password of user root, and click OK.

    The Preparing System for Automated Installation window is displayed, as shown in Figure 3-51.

    Figure 3-51 Preparing System for Automated Installation

    After the installation preparation is complete, the Installation Settings window is displayed, as shown in Figure 3-52.

    Figure 3-52 Installation Settings
    NOTE:

    In this window, you can customize the time zone, language, network, and components.

  9. Click Partitioning.

    The Expert Partitioner window is displayed, as shown in Figure 3-53.

    Figure 3-53 Expert Partitioner

  10. In the navigation tree, choose linux > Hard Disks. Select a hard disk from the Hard Disks drop-down list box, and click Overview.

    The Overview tab of the hard disk is displayed, as shown in Figure 3-54. The value of Device ID 1 of the selected hard disk must be the same as the value of WWID of the selected hard disk selected in Step 4.

    Figure 3-54 Overview

  11. Click Partitions to create hard disk partitions.

    Figure 3-55 Partition information
    • If the existing partitions meet site requirements, go to Step 12.
    • If the existing partitions do not meet site requirements, perform the operations described in Table 3-2 to delete or create partitions.
      Table 3-2 Creating and deleting hard disk partitions

      Operation

      Step

      (Optional) Delete an existing partition.

      Select a partition and click Delete to delete it.

      Create a root partition.

      1. Click Add.
      2. Select Primary Partition as the partition type and click Next.
      3. Set Custom Size to an appropriate value, for example, 20 GB. Then click Next.
      4. Set Role to Operating System.
      5. Retain the default value Format partition for Formatting Options and the default value BtrFS for File System.
      6. Retain the default value Mount partition for Mounting Options and the default value / for Mount Point.
      7. Click Finish.

      Create a swap partition.

      1. Click Add.
      2. Select Primary Partition as the partition type and click Next.
      3. Set Custom Size to an appropriate value, for example, 4 GB. Then click Next.
      4. Set Role to Swap.
      5. Retain the default value Format partition for Formatting Options and the default value Swap for File System.
      6. Retain the default value Mount partition for Mounting Options and the default value swap for Mount Point.
      7. Click Finish.

  12. Click Accept.

    The Installation Settings window is displayed.

  13. Click Install.

    A confirmation dialog box is displayed, as shown in Figure 3-56.

    Figure 3-56 Dialog box

  14. Click Install.

    The OS installation starts, as shown in Figure 3-57.

    Figure 3-57 Starting the OS installation
    NOTE:

    You can click Details to view details about the installation process.

    After the OS is installed, the server automatically restarts. After the restart is complete, the server automatically enters the OS.

Translation
Download
Updated: 2018-06-20

Document ID: EDOC1100018400

Views: 3599

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next