No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 Smart Provisioning User Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a VMware OS in Default Mode

Installing a VMware OS in Default Mode

Install a VMware OS on a server by using Smart Provisioning in default mode. In the following operations, VMware ESXi 6.5.0 and the BIOS UEFI node are used as an example.

  1. Log in to Smart Provisioning. For details, see Logging In to Smart Provisioning.

    The Smart Provisioning main window is displayed, as shown in Figure 3-89.

    Figure 3-89 Smart Provisioning main window

  2. In the Smart Provisioning main window, click Deploy OS.

    The OS deployment main window is displayed, as shown in Figure 3-90.

    Figure 3-90 OS deployment main window

  3. Select Recommended Mode and the OS version to be installed, and click Next.

    NOTE:

    The selected OS version must be the same as that in the installation DVD-ROM or ISO image file.

    The Select Disk window is displayed, as shown in Figure 3-91.
    Figure 3-91 Select Disk
    NOTE:

    During the installation process, Smart Provisioning sets the selected hard disk to the boot disk.

  4. Select an installation hard disk and click Next.

    The window for setting the password of user root is displayed, as shown in Figure 3-92.

    Figure 3-92 Setting the password of user root
    NOTE:
    • The password must contain at least seven characters.
    • The password cannot contain spaces and #$.

  5. Set the password of user root, and click Next.

    The window shown in Figure 3-93 is displayed, indicating that the OS version does not support the installation of third-party software.
    Figure 3-93 Window

  6. Click Next.

    The configuration summary window is displayed, as shown in Figure 3-94.

    Figure 3-94 Viewing the configuration summary

  7. Confirm that the information is correct and click Next.

    The window prompting you to insert the OS medium is displayed, as shown in Figure 3-95.

    Figure 3-95 Window prompting you to insert the OS medium

  8. Insert the OS medium.

    1. Select the medium of the OS to be installed.
      • If you use the OS DVD-ROM, insert the DVD-ROM of the OS to be installed into the DVD-ROM drive.
      • If you use the OS image file, perform 8.b to 8.f.
    2. Click on the toolbar of the Remote Virtual Console.

      The virtual DVD-ROM drive dialog box is displayed, as shown in Figure 3-96.

      Figure 3-96 Virtual DVD-ROM drive
    3. Select Image File.
    4. Click Browse.

      The Open dialog box is displayed.

    5. Select the ISO image file of the OS to be installed, and click Open.
    6. In the virtual DVD-ROM drive dialog box, click Connect.

      When Connect changes to Disconnect, the ISO image file of the OS is successfully loaded.

  9. Click Next.

    The OS installation starts, as shown in Figure 3-97.

    Figure 3-97 Starting the installation

    After the OS installation starts, the server restarts automatically. After the server restart is complete, the server downloads the system configuration file, as shown in Figure 3-98.

    Figure 3-98 Downloading the system configuration file

    After the system configuration file is downloaded, the OS installation is performed automatically, as shown in Figure 3-99.

    Figure 3-99 Installing the OS

    After the OS installation is complete, the information shown in Figure 3-100 is displayed.

    Figure 3-100 Installation completed

    After the OS is installed, the server automatically restarts. After the restart is complete, the server automatically enters the OS.

Translation
Download
Updated: 2018-06-20

Document ID: EDOC1100018400

Views: 3583

Downloads: 24

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next