No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAP HANA Appliance Two Node Installation Guide (RH5885H and RH8100 V3+Redhat) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Switch Configuration

Switch Configuration

The standard switches of the standalone SAP HANA HA cluster are Huawei S6700 or S6800 series switches. The entire cluster provides HANA upper-layer service ports using the 10GE Ethernet network. Two S6700 or S6800 switches need to be stacked to form an HA network. If switches already exist in the customer's existing environment, configure the stacking function for them to form an HA network.

To configure the stacking of Huawei S6700 or S6800 series switches, perform the following steps:

  1. Configure a stack port on each S6700 or S6800 switch. Generally, the port with the largest port number is used as the stack port. For a four-node HANA solution, you are advised to configure four stack ports.
  2. Configure the stacking of two S6700 or S6800 switches. For details, see S6700 or S6800 User Guide.
  3. Connect the network according to the network planning.
Updated: 2019-08-27

Document ID: EDOC1100019155

Views: 35230

Downloads: 132

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next