No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Huawei SAP HANA Appliance Two Node Installation Guide (RH5885H and RH8100 V3+Redhat) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Parameters

Default Parameters

Table 1-5 lists the default IP address parameters, and Table 1-6 describes the default user parameters.

Table 1-5 Default IP address parameters



Default Value

RH5885H V3/RH8100 V3 Server node 1

iBMC management module

Default IP address:

Subnet mask:

RH5885H V3/RH8100 V3 Server node 2

iBMC management module

Default IP address:

Subnet mask:

Table 1-6 Default user parameters





RH5885H V3/RH8100 V3

iBMC management module

Used to log in to the WebUI, SSH, and SNMP through a serial port or a network port.

Username: root

Password: Huawei12#$

Updated: 2019-08-27

Document ID: EDOC1100019155

Views: 35133

Downloads: 132

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next