No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Huawei SAP HANA Appliance Two Node Installation Guide (RH5885H and RH8100 V3+Redhat) 08

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Planning

Network Planning

This document describes the planning of the test network in a laboratory. Customers can make plans for related IP addresses based on the site requirements. The following figure shows the RH5885H V3 network diagram, which is similar to that of the RH8100 V3.

Table 1-7 Network planning

Device Name

Type

IP Address Planning

Remarks

RH5885H V3/RH8100 V3

Management network BMC

Node1: 192.168.2.10

Node2: 192.168.2.11

BMC management IP addresses.

OS management port eth0

Redhat cluster secondary heartbeat

Node1: 192.168.2.20

Node2: 192.168.2.21

The IP addresses of the OS management port and BMC management port should be on the same network segment.

Cluster internal port Bond0

10GE Ethernet

Node1: 10.5.2.10

Node2: 10.5.2.11

IP addresses in the private network segment.

Two servers are bound by using two 10GE NICs for HANA database synchronization and cluster redundant heartbeat links.

Service network port Bond1

10GE Ethernet

Node1: 10.5.1.10

Node2: 10.5.1.11

IP addresses in the service network segment. Also use to cluster main heartbeat links and prevent a cluster from brain splitting.

Service network port

Virtual IP address

10.5.1.12

Virtual IP address in the service network segment.

Services access a HANA HA cluster through a virtual IP address, which is on the same network segment as the service network.

Translation
Download
Updated: 2019-05-14

Document ID: EDOC1100019155

Views: 18126

Downloads: 94

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next