No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the SNMP Trap State (trap -d state)

Querying and Setting the SNMP Trap State (trap -d state)


The trap -d state command is used to query and set the SNMP trap state.


ipmcget -t trap -d state [-v destination]

ipmcset -t trap -d state -v [destination] <disabled | enabled>


Parameter Description Value

Identifies an SNMP trap destination.

  • Value range: 1 to 4

  • If this parameter is not specified, the command is used to set the trap function.

disabled Disables SNMP trap. -
enabled Enables SNMP trap. -

Usage Guidelines

  • To set trap for a specific channel, specify destination. The value range of destination is 1 to 4.

  • To enable or disable the trap function, leave destination unspecified.


# Disable SNMP trap destination 1.

iBMC:/->ipmcset -t trap -d state -v 1 disabled
Set trap dest1 disabled successfully.

# Query the state of SNMP trap destination 1.

iBMC:/->ipmcget -t trap -d state -v 1
trap dest1 state : disabled
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 96778

Downloads: 102

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next