No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Trap Function on the iBMC WebUI

Configuring the Trap Function on the iBMC WebUI

Operation Scenario

Enable the trap function on Alarm & SEL > Alarm Setting of the iBMC WebUI.

The trap function enables the iBMC to send alarm information, event information, and trap properties to a third-party server through trap messages.

Prerequisites

Data

  • SNMP trap version
  • Host identifier (such as Board Serial Number, Product Asset Tag, or Host Name) used to identify the source of the message
  • SNMP trap community name
  • Address of the server receiving trap messages

Procedure

  1. Log in to the iBMC WebUI. For details, see Logging In to the iBMC WebUI.
  2. Choose Alarm & SEL > Alarm Settings.
  3. In the Alarm Trap Notification Settings area, click to enable the trap function.

    If changes to , the trap function is enabled.

  4. Set trap parameters and click Save.

    Set the following parameters:

    • Trap Version: Select an SNMP trap version. SNMPv3 is recommended. Exercise caution when using SNMPv1 and SNMPv2c, because they pose security risks.
    • Choose Trap SNMPv3 User: Set this parameter only when Trap Version is SNMPv3. The default user name is root for V3 servers and Administrator for V5 servers.
    • Trap Mode: Set the mode for reporting trap information.
      • Select Precise Alarm (recommended) to use the SNMP node OID that is in one-to-one mapping with the event to identify a trap event. Compared with OID and Event Code, this mode provides more accurate information.
      • −Select OID to use the object identifier of the SNMP node to identify a trap event.
      • −Select Event Code to use the event code to identify a trap event.
    • Trap Server Identity: Set the source host of the trap message. The source host can be identified by Board Serial Number, Product Asset Tag, or Host Name.
    • Community Name and Confirm Community Name: Set the community name only when Trap Version is set to SNMPv1 or SNMPv2c. The community name is used for trap authentication if SNMPv1 or SNMPv2c is used. Community Name and Confirm Community Name must be the same.
    • Include Alarm Severities: Select the severities of alarms to be reported through trap messages.

  5. Configure the trap server and message format.

    A maximum of four channels can be specified to send alarms.

    1. In the Trap Server and Message Format area, click under the Operation column of a channel.
    2. Click to enable the channel.

      If changes to , the channel is enabled.

    3. In the Trap Server Address text box, enter an IPv4 or IPv6 address for the server that receives the trap messages.
    4. In the Trap Port text box, enter the port number for receiving trap messages.

      The default port number is 162.

    5. On the right of Packet Delimiter, select the delimiter used to separate the key words in trap messages.
    6. In Select Message Content, select the content to be included in trap messages.

      The content includes time, sensor name, severity, event code, and event description.

    7. Select Display Keyword in Message to display the keywords in trap messages. Deselect this check box if you do not want to display the keywords in trap messages.
    8. Click Save.

      If "Operation successful" is displayed, the configuration is saved successfully.

    9. Click Test to check whether the trap channel is available.

      If "Operation successful" is displayed, the trap channel is available.

Download
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 92513

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next