No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing the iBMC Trust and Root Certificates

Importing the iBMC Trust and Root Certificates

Scenarios

A security alert will be displayed when you log in to the iBMC WebUI using a browser. If you do not want this alert to be displayed, import the trust and root certificates of the iBMC using the browser.

This section uses Internet Explorer 11.0 as an example to describe how to import trust and root certificates of the iBMC.

Prerequisites

Conditions

The root and trust certificates to be imported are available.

Data

None.

Software

None.

Procedure

    Importing a Trust Certificate

    1. Open Internet Explorer, and click .

      The dialog box shown in Figure 6-34 is displayed.

      Figure 6-34 Internet Options

    2. Click the Content tab and select Certificates.

      The dialog box shown in Figure 6-35 is displayed.

      Figure 6-35 Certificates

    3. Choose Intermediate Certification Authorities > Import.

      The dialog box shown in Figure 6-36 is displayed.

      Figure 6-36 Certificate Import Wizard

    4. Click Next.

      The dialog box shown in Figure 6-37 is displayed.

      Figure 6-37 Selecting the certificate to be imported

    5. Click Browse, select the certificate to be imported from the local PC, and click Next.
    6. In the dialog box displayed, as shown in Figure 6-38, select the directory in which the certificate is to be stored, and click Next.

      Figure 6-38 Selecting the destination directory for the certificate

    7. Click Finish.

      If "The import was successful" is displayed, the certificate is imported successfully.

    8. Click OK.

    Importing a Root Certificate

    1. Repeat step 1 and step 2.

      The dialog box shown in Figure 6-39 is displayed.

      Figure 6-39 Certificates

    2. Choose Trusted Root Certification Authorities > Import.

      The dialog box shown in Figure 6-40 is displayed.

      Figure 6-40 Certificate Import Wizard

    3. Repeat step 4 to step 8 to import the root certificate.

    Deselecting Allow active content to run in files on My Computer

    This operation takes effect only after you restart the server.

    1. Click , and choose Internet Options > Advanced.

      The Internet Options window is displayed, as shown in Figure 6-41.

      Figure 6-41 Internet Options

    2. Deselect Allow active content to run in files on My Computer, and click Apply and then OK.

      If the security alert is still displayed after you log in to the iBMC WebUI, restart the browser and log in to the iBMC WebUI.

      NOTE:

      If any other issuer is displayed in Issued by in the certificate error message, import the trust certificate of the issuer to shield the security alert.

Download
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 93731

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next