No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a Logical Drive (deleteld)

Deleting a Logical Drive (deleteld)


The deleteld command is used to delete a logical drive managed by a RAID controller.


ipmcset -t storage -d deleteld -v <control_id> <ldid>






Specifies the ID of the RAID controller.

0 to 255
ldid Specifies the ID of a logical disk to be deleted. 0 to 255

Usage Guidelines

This command can be used only when either of the following conditions is met:
  • The RAID controller card supports iBMC out-of-band management. You can refer to the Technical Specifications section in the RAID controller card user guide to determine whether the RAID card supports the iBMC out-of-band management.
  • The iBMA 2.0 has started on the OS.


# Delete logical drive 1 managed by RAID controller 0.

iBMC:/-> ipmcset -t storage -d deleteld -v 0 0 
WARNING: The operation may have many adverse effects.
Do you want to continue?[Y/N]:y
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 93062

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next