No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the Logging Function for a RAID Controller Card (raidcom)

Querying and Setting the Logging Function for a RAID Controller Card (raidcom)

Function

The raidcom command is used to query and set the logging function for a RAID controller card. After the logging function is enabled for a RAID controller card, you can use the one-click info collection function to collect the log information of the card. The log files are stored in dump_info\LogDump\storage.

Format

ipmcget -t maintenance -d raidcom

ipmcset -t maintenance -d raidcom -v <value>

Parameters

Parameter Description Value
<value> Serial number of the RAID controller card. The serial number of the RAID controller card varies depending on the server model. You can obtain the RAID controller card serial number from the CLI help information.

Usage Guidelines

The iBMC V290 and later versions support this command.

Only the XH321 V5 supports this command.

The LSI SAS3008 IT and IR RAID cards and Avago 3416 IT RAID card do not support this command.

Example

# Query the RAID controller card that has the logging function enabled.

iBMC:/->ipmcget -t maintenance -d raidcom
Current RAID com connected:
Com Channel     :  1
Device Name     :  RAID Card1

# Enable the logging function for RAID controller card 1.

iBMC:/->ipmcset -t maintenance -d raidcom -v
Usage: ipmcset -t maintenance -d raidcom -v <value>
Values are:
    1     RAID Card1
iBMC:/->ipmcset -t maintenance -d raidcom -v 1
Set RAID com channel to RAID Card1 successfully.
Download
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 93520

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next