No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Syslog on the iBMC WebUI

Configuring Syslog on the iBMC WebUI

Scenarios

Enable and configure the syslog function on Alarm & SEL > Alarm Settings of the iBMC WebUI.

Prerequisites

Conditions

The local client can communicate with the server iBMC.

Data

  • Syslog information:
    • Information used to identify the source host, for example, the board serial number, product asset tag, or host name
    • Transmission protocol to be used, for example, TLS, TCP, or UDP
    • Syslog authentication method, for example, one-way or two-way authentication
    • Log levels
  • Syslog server information and log types:
    • Channel status
    • Server address
    • Server port number
    • Types of logs to be reported

Software

A free certificate generation tool, such as OpenSSL, downloaded from the Internet.

Procedure

  1. Generate certificates.

    The certificates required vary depending on the authentication mode:

    • One-way authentication: requires a syslog server certificate and a server root certificate.
    • Two-way authentication: requires a syslog server certificate, a server root certificate, a syslog client certificate, and a client root certificate.

    For details about how to generate certificates, see the user guide of OpenSSL.

  2. Upload certificates to the syslog server.

    Use a file transfer tool that supports SFTP, for example WinSCP, to transfer the certificates to the specified directory (for example /tmp) of the iBMC file system.

    • One-way authentication: Upload the server certificate to the syslog server.
    • Two-way authentication: Upload the server certificate and client root certificate to the syslog server.

  3. Log in to the iBMC WebUI.

    For details, see Logging In to the iBMC WebUI.

  4. Configure the syslog function.
    1. On the iBMC WebUI, choose Alarm & SEL > Alarm Settings.
    2. In the Syslog Notification Settings area, set Syslog Notifications to .
    3. Set Syslog Server Identity, Alarm Severities, Transmission Protocol, and Authentication Mode.
    4. Upload certificates.

      • If Authentication Mode is One-way, upload the server root certificate (generated in Generate certificates) to the iBMC.
      • If Authentication Mode is Two-way, upload the server root certificate and client certificate (generated in Generate certificates) to the iBMC.

  5. Configure the syslog server and message format.
    1. Locate the channel for sending syslog messages, and click in the Operation column.
    2. Set Current Status to to enable the channel.
    3. Set Server Address, Syslog Port, and Log Type.
    4. Click Test.
Download
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 96084

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next