No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Smart Provisioning GUI

Logging In to the Smart Provisioning GUI

Scenarios

Log in to the Smart Provisioning GUI through the iBMC WebUI when you want to use Smart Provisioning to install OS, configure RAID, or upgrade firmware.

NOTE:
  • Do not restart the iBMC during the SP startup process.
  • If the iBMC is reset after SP is started, you need to log in to SP again.

Prerequisites

Conditions

You have logged in to the iBMC WebUI.

Data

None

Hardware

None

Procedure

  1. Choose Remote Console on the iBMC WebUI.
  2. Click Java Integrated Remote Console or HTML5 Integrated Remote Console to open the remote console.

    • Private Mode: allows only one user to access and manage the server at a time.
    • Shared Mode: allows two users to access and manage the server at the same time. The two users can see each other's operations.

    This section uses the Java Integrated Remote Console as an example.

  3. Click on the toolbar, and select Forced System Reset or Forced Power Cycle to restart the OS.
  4. During the startup process, press F6 when the screen shown in Figure 8-2 is displayed.

    Figure 8-2 Startup screen

  5. If a dialog box prompting you to enter a password is displayed during the startup process, enter a password and press Enter.

    The default password is Admin@9000.

    The dialog box shown in Figure 8-3 is displayed.

    Figure 8-3 Confirm

  6. Click OK.

    The Smart Provisioning welcome window is displayed, as shown in Figure 8-4.

    Figure 8-4 Smart Provisioning welcome window

  7. Click Start.

    The Smart Provisioning home page is displayed, as shown in Figure 8-5.

    Figure 8-5 Smart Provisioning home page

    NOTE:

    To return to the home page of Smart Provisioning, click in the upper right corner.

Download
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 96099

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next