No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Physical Drive Properties (pdconfig)

Modifying Physical Drive Properties (pdconfig)

Function

The pdconfig command is used to modify properties of a physical drive managed by a RAID controller.

Format

ipmcset -t storage -d pdconfig -v <pdid> [-state <pdstate>] [-hotspare <hotsparetype> [-ld <ldid>]] [-locate <locatestate>] [-cryptoerase]

Parameters

Parameter

Description

Value

pdid

Specifies the ID of the physical drive.

0 to 255
pdstate Specifies the status of the physical drive.
  • online: The drive is online.
  • offline: The drive is offline.
  • ug: The drive is idle.
  • jbod: The drive is a JBOD disk.
hotsparetype Specifies the hot spare status of the physical drive.
  • none: It is not a hot spare disk
  • global: It is a global spare hot disk.
  • dedicated: It is a dedicated spare hot disk.
ldid Specifies the ID of the logical drive.

If hotsparetype is dedicated, you need to set the logical drive associated with this physical drive.

0~255
locatestate Specifies the status of the location indicator of the physical drive.
  • start: The location indicator is flashing.
  • stop: The location indicator is off.

Usage Guidelines

The -cryptoerase parameter in the command indicates erasing data from the encrypted drive.

NOTE:

Only iBMC V320 and later versions support data erase from encrypted drives.

This command can be used only when either of the following conditions is met:
  • The RAID controller card supports iBMC out-of-band management. You can refer to the Technical Specifications section in the RAID controller card user guide to determine whether the RAID card supports the iBMC out-of-band management.
  • The iBMA 2.0 has started on the OS.

Example

# Erase data from encrypted physical drive 1.

iBMC:/-> ipmcset -t storage -d pdconfig -v 1 -cryptoerase
WARNING: The operation may have many adverse effects.
Do you want to continue?[Y/N]:y
The operation may take a few seconds, Please wait...
Cryptographically erase Physical Drive successfully.
Download
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 92694

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next