No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro X6000 Server iBMC (V300 to V369) User Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the SNMPv3 User Encryption Password (snmpprivacypassword)

Setting the SNMPv3 User Encryption Password (snmpprivacypassword)

Function

The snmpprivacypassword command is used to set the data encryption password for a user who uses SNMPv3 to connect to the iBMC.

Format

ipmcset -t user -d snmpprivacypassword -v username

Parameters

Parameter Description Value
username Indicates the existed user whose password is to be changed. -

Usage Guidelines

This command is available only for V5 servers.

Administrators can change the password of any user. Operators and common users can only change their own passwords. The password of the current user is required.

The password setting rules vary depending on whether password complexity check and weak password check are enabled. To check whether password complexity check is enabled, run the passwordcomplexity command. To check whether weak password check is enabled, run the weakpwddic command.

  • If password complexity check is disabled, the password cannot be empty or exceed 20 characters.
  • If password complexity check is enabled, the password must meet the following requirements:

    • Contain 8 to 20 characters
    • Contain at least a space or one of the following special characters:

      `~!@#$%^&*()-_=+\|[{}];:'",<.>/?

    • Contain at least two types of the following characters:

      • Uppercase letters A to Z
      • Lowercase letters a to z
      • Digits 0 to 9
    • Cannot be the same as the user name or the user name in reverse order.
    • Have at least two new characters when compared with the previous password.
  • If weak password check is enabled, the password cannot be the same as the passwords contained in the weak password dictionary. (You can run the ipmcset -t user -d weakpwddic -v export command to export the weak passwords from the weak password dictionary.)
    NOTE:
    • Weak password check is not supported by V3 servers.

    • The default password Admin@9000 of the V5 servers is in the weak password dictionary.

Example

# Set the password for the SNMPv3 user.

iBMC:/->ipmcset -t user -d snmpprivacypassword -v Administrator
Input your password:
Password:
Confirm password:
Set snmp privacy password successfully.
Download
Updated: 2019-08-01

Document ID: EDOC1100019359

Views: 92934

Downloads: 98

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next