No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V300 or Later) User Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the IP Address of the Management Network Port

Querying the IP Address of the Management Network Port

You can query and set the IP address of the management network port by using:

  • Basic input/output system (BIOS)

  • iBMC CLI over the serial port

Default IP Addresses

Table 4-2 lists the default IP addresses of the iBMC management network port.

Table 4-2 Default IP addresses

Product Type

Server Node Type

Slot No.

IP Address

X6800 server

  • XH622 V3
  • XH628 V3

1

10.10.1.101

3

10.10.1.103

5

10.10.1.105

7

10.10.1.107

XH620 V3

1

10.10.1.101

2

10.10.1.102

3

10.10.1.103

4

10.10.1.104

5

10.10.1.105

6

10.10.1.106

7

10.10.1.107

8

10.10.1.108

Translation
Download
Updated: 2019-02-28

Document ID: EDOC1100019360

Views: 76568

Downloads: 384

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next