No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V300 or Later) User Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rolling Back the iBMC Software (rollback)

Rolling Back the iBMC Software (rollback)

Function

The rollback command is used to switch the iBMC firmware from the image file in the primary partition to the image file in the secondary partition.

Format

ipmcset -d rollback

Parameters

None

Usage Guidelines

None

Example

# Roll back the iBMC software.

iBMC:/->ipmcset -d rollback
WARNING: The operation may have many adverse effects
Do you want to continue?[Y/N]:y
Set rollback successfully, system will reboot soon!
Translation
Download
Updated: 2019-02-28

Document ID: EDOC1100019360

Views: 77222

Downloads: 384

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next