No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V300 or Later) User Guide 08

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting iBMC IPv4 Address (ipaddr)

Setting iBMC IPv4 Address (ipaddr)

Function

The ipaddr command is used to set the IPv4 address, subnet mask, and the gateway address for the iBMC.

Format

ipmcset -d ipaddr -v <ipaddr> <mask> [gateway]

Parameters

Parameter Description Value
ipaddr Indicates the IPv4 address to be set for the iBMC.

An IPv4 address in the xxx.xxx.xxx.xxx. format.

mask Indicates the subnet mask to be set for the iBMC.

An IPv4 address in the xxx.xxx.xxx.xxx. format.

gateway Indicates the gateway address to be set for the iBMC.

An IPv4 address in the xxx.xxx.xxx.xxx. format.

Usage Guidelines

After the IP address is changed, the new IP address takes effect immediately, and you must use the new IP address to log in again.

The 172.31.1.*/24 network segment is reserved for the server internal communication network ports. Do not assign addresses in this network segment to iBMC management network ports.

Example

# Set the IP address of the iBMC management network interface to 192.168.0.25, the subnet mask to 255.255.255.0, and the gateway to 192.168.0.25.

iBMC:/->ipmcset -d ipaddr -v 192.168.0.25 255.255.255.0 192.168.0.25
Set IP address successfully.
Set MASK address successfully.
Set GATEWAY successfully.

# Query the changed IP address of the iBMC management network interface.

iBMC:/->ipmcget -d ipinfo
EthGroup ID           :  1
Net Mode              :  Manual
Net Type              :  Dedicated
IPv4 Information      :
IP Mode               :  static
IP Address            :  192.168.0.25
Subnet Mask           :  255.255.255.0
Default Gateway       :  192.168.0.25
MAC Address           :  00:18:e1:c5:d8:66
IPv6 Information      :
IPv6 Mode             :  dhcp
IPv6 Address          :
Default Gateway IPv6  :
Link-Local Address    :  fe80::220:19ff:fe55:188/64
VLAN Information      :
VLAN State            :  disabled

EthGroup ID           :  2
Net Mode              :  Manual
Net Type              :  Dedicated
IPv4 Information      :
IP Mode               :  static
IP Address            :  172.31.1.139
Subnet Mask           :  255.255.0.0
Default Gateway       :
MAC Address           :  00:20:19:55:01:88
IPv6 Information      :
IPv6 Mode             :  static
IPv6 Address          :
Default Gateway IPv6  :
Link-Local Address    :  fe80::220:19ff:fe55:188/64
VLAN Information      :
VLAN State            :  enabled
VLAN ID               :  4093
Translation
Download
Updated: 2019-06-04

Document ID: EDOC1100019360

Views: 85989

Downloads: 403

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next