No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V300 or Later) User Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting the Log Levels (syslog -d severity)

Querying and Setting the Log Levels (syslog -d severity)

Function

The syslog -d severity command is used to query and set the levels of the logs reported over syslog.

Format

ipmcget -t syslog -d severity

ipmcset -t syslog -d severity -v <level>

Parameters

Parameter

Description

Value

level

Specifies the levels of logs to be reported.

  • none: no alarms will be reported.
  • normal: reports alarms and event logs.
  • minor: reports minor, major, and critical alarms.
  • major: reports major and critical alarms.
  • critical: reports critical alarms.

Usage Guidelines

None.

Example

# Set the log level to critical for syslog reporting.

iBMC:/->ipmcset -t syslog -d severity -v critical
Set syslog severity successfully.

# Query the levels of logs to be sent over syslog.

iBMC:/-> ipmcget -t syslog -d severity
Syslog severity:  critical
Translation
Download
Updated: 2019-02-28

Document ID: EDOC1100019360

Views: 76392

Downloads: 384

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next