No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V300 or Later) User Guide 08

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mounting a File to the Virtual CD-ROM Drive (vmm -d connect)

Mounting a File to the Virtual CD-ROM Drive (vmm -d connect)

Function

The vmm -d connect command is used to mount a file to the virtual CD-ROM drive.

Format

ipmcset -t vmm -d connect -v <file_URL>

Parameters

Parameter

Description

Value

file_URL

Specifies the source directory of the file to be mounted.

Format:

protocol://[username:password@]IP:[port]/directory/filename

Where:

  • protocol must be nfs, cifs, or https.
    NOTE:

    Only iBMC 3.00 and later versions support https.

    The iBMC supports only Server Message Block (SMB) V1.0.

  • username indicates the user name used to log in to the target server.
  • password indicates the password used to log in to the target server.
  • IP:[port] indicates the IP address and port number of the target server.
  • directory/filename indicates the absolute directory in which the file is to be stored on the target server.

For example, nfs://192.168.44.178/home/admin/nfsserver/rhel-server-6.3-x86_64-dvd.iso.

NOTE:

The file_URL can contain up to 255 characters.

Usage Guidelines

Before running this command, use a file transfer tool supporting SFTP (for example WinSCP) to transfer the file to be imported to the specified directory (for example /tmp) of the iBMC file system.

Example

# Mount rhel-server-6.3-x86_64-dvd.iso to the virtual CD-ROM drive.

iBMC:/-> ipmcset -t vmm -d connect -v nfs://192.168.44.178/home/admin/nfsserver/rhel-server-6.3-x86_64-dvd.iso

Connect virtual media...
.............
Connect virtual media successfully.
Translation
Download
Updated: 2019-06-04

Document ID: EDOC1100019360

Views: 88255

Downloads: 413

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next