No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V300 or Later) User Guide 08

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Clearing the Power-On Lock (poweronlock)

Querying and Clearing the Power-On Lock (poweronlock)

Function

By default, if the server is not powered on within the specified time, the function of powering on the server through the iBMC will be locked. As a result, the server cannot be powered on through the iBMC.

The poweronlock command is used to query the status of the power-on lock.

The poweronlock -v clear command is used to clear the lock.

Format

ipmcget -t maintenance -d poweronlock

ipmcset -t maintenance -d poweronlock -v clear

Parameters

None

Usage Guidelines

The iBMC supports this command from version V338.

Example

# Query the power-on lock status.

iBMC:/->ipmcget -t maintenance -d poweronlock
Power on lock state: Locked

# Clear the power-on lock.

iBMC:/->ipmcset -t maintenance -d poweronlock -v clear
WARNING: The operation may have many adverse effects.
Do you want to continue?[Y/N]:Y
Clear power on lock successfully.
Translation
Download
Updated: 2019-06-04

Document ID: EDOC1100019360

Views: 91855

Downloads: 430

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next