No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V300 or Later) User Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading the Firmware (upgrade)

Upgrading the Firmware (upgrade)

Function

The upgrade command is used to upgrade the server firmware, which includes the iBMC, BIOS, SD card firmware, and complex programmable logic device (CPLD).

Format

ipmcset -d upgrade -v <filepath>

Parameters

Parameter Description Value
filepath

Specifies the absolute path of the upgrade file.

NOTE:
Only the xxx.hpm file is supported.
Example value: /tmp/image.hpm.

Usage Guidelines

Before running this command, use a file transfer tool that supports SFTP, for example WinSCP, to transfer the upgrade file to the specified directory (for example /tmp) of the iBMC file system.

After the iBMC or SD card controller upgrade is complete, the iBMC restarts automatically for the upgrade to take effect.

Example

# Upgrade the firmware.

iBMC:/->ipmcset -d upgrade -v /tmp/image.hpm
Please make sure the iBMC is working while upgrading!
Updating...
100%
Update successfully.
Translation
Download
Updated: 2019-02-28

Document ID: EDOC1100019360

Views: 77916

Downloads: 388

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next