No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

X6800 Server Node iBMC (V300 or Later) User Guide 07

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying and Setting Controlled Power-on Configuration (poweronpermit)

Querying and Setting Controlled Power-on Configuration (poweronpermit)

Function

The poweronpermit command is used to query and set the controlled power-on function.

Format

ipmcget -d poweronpermit

ipmcset -d poweronpermit -v <enable | disable> [ip] [netport]

Parameters

Parameter Description Value
enable Enables the controlled power-on function. -
disable Disables the controlled power-on function. -
ip Specifies the server IP address. -
netport Specifies the port number. 0 to 65535

Usage Guidelines

None

Example

# Query configuration of the controlled power-on function.

iBMC:/->ipmcget -d poweronpermit
State         : enabled
ManagerIP     : 192.168.1.1
ManagerPort   : 26957

# Enable the controlled power-on function.

iBMC:/->ipmcset -d poweronpermit -v enable 192.168.1.1 26957
Set poweronpermit successfully.
Translation
Download
Updated: 2019-02-28

Document ID: EDOC1100019360

Views: 77713

Downloads: 384

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next