No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) User Manual

This document describes the SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Exporting Data

Exporting Data


  1. On the SUN2000 APP, tap Inverter Command Settings to generate a boot script file. For details, see the SUN2000 APP User Manual.
  2. Import the boot script file to the root directory of a USB flash drive.
  3. Connect the USB flash drive to the USB port. The system automatically identifies the USB flash drive and executes all commands specified in the boot script file. View the LED indicator to determine the operating status.

    Verify that the ciphertext in the boot script file matches the login password of the SUN2000 APP. If they do not match and you insert the USB flash drive for five consecutive times, the user account will be locked for 10 minutes.
    Table 7-3  LED indicator description

    LED Indicator



    Green off

    There is no operation with a USB flash drive.

    Blinking green at long intervals (on for 1s and then off for 1s)

    There is an operation with a USB flash drive.

    Blinking green at short intervals (on for 0.125s and then off for 0.125s)

    An operation with a USB flash drive has failed.

    Steady green

    An operation with a USB flash drive is successful.

  4. Insert the USB flash drive into a PC and check the exported data.

    After the data is exported, the boot script file and exported file are in the root directory of the USB flash drive.

Updated: 2019-08-02

Document ID: EDOC1100019925

Views: 15171

Downloads: 6732

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next