No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) User Manual

This document describes the SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Tools

Tools

Prepare tools required for installation and cable connections.

Tool

Model

Function

Hammer drill

Drill bit: Φ14 mm and Φ16 mm

  • Drill bit: Φ14 mm, used for drilling holes in the support.
  • Drill bit: Φ16 mm, used for drilling holes in the wall.

Adjustable wrench

  • With a length of 200 mm
  • With an open end of 24 mm

Secures bolts.

Socket wrench

N/A

Secures bolts and AC output terminals.

Torque wrench

With an open end of 18 mm, 33 mm, 52 mm, or 65 mm

Secures bolts and locking caps.

Diagonal pliers

N/A

Cut cable ties.

Wire stripper

N/A

Peels cable jackets.

Flat-head screwdriver

Head: 0.6 mm x 3.5 mm

Connects cables to terminal bases.

Rubber mallet

N/A

Hammers expansion bolts into holes.

Utility knife

N/A

Removes packages.

Cable cutter

N/A

Cuts power cables.

Crimping tool

Model: UTXTC0005 or H4TC0003

Manufacturer: Amphenol

Crimps metal contacts when preparing DC input power cables.

NOTE:
  • UTXTC0005 (Amphenol) is used to crimp metal cold forming contacts.
  • H4TC0003 (Amphenol) is used to crimp metal stamping forming contacts.

RJ45 crimping tool

N/A

Prepares RJ45 connectors for communications cables.

Removal tool

H4TW0001

Manufacturer: Amphenol

Removes DC connectors from the SUN2000.

Vacuum cleaner

N/A

Cleans up dust after drilling holes.

Multimeter

DC voltage measurement range: ≥ 1100 V DC

Measures voltages.

Marker

Diameter: ≤ 10 mm

Marks signs.

Measuring tape

N/A

Measures distances.

Level

N/A

Levels hole positions.

Protective gloves

N/A

Protect your hands during installation.

Safety goggles

N/A

Protects the operator's eyes during hole drilling.

Anti-dust respirator

N/A

Protects an operator from dust inhalation during hole drilling.

Hydraulic pliers

N/A

Crimp OT/DT terminals.

Heat shrink tubing

N/A

Wraps the cable crimping area of an OT/DT terminal.

Heat gun

N/A

Heat-shrinks a tube.

Cable tie

N/A

Binds cables.

Download
Updated: 2019-08-02

Document ID: EDOC1100019925

Views: 14730

Downloads: 6689

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next