No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) User Manual

This document describes the SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Moving the Inverter

Moving the Inverter


  • To prevent device damage and personal injury, keep balance when moving the SUN2000 because the SUN2000 is heavy.
  • Do not place the SUN2000 with its wiring terminals at the bottom contacting the floor or any other object because the terminals are not designed to support the weight of the SUN2000.
  • When placing the SUN2000 on the floor, put foam or paper under the SUN2000 to protect its cover.


  1. Arrange two persons to hold the handles on both sides of the SUN2000.

    Figure 4-8  Lifting the SUN2000

  2. Lift the SUN2000 from the packing case and move it to the installation position with the help of multiple persons.
Updated: 2019-08-02

Document ID: EDOC1100019925

Views: 15015

Downloads: 6715

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next