No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) User Manual

This document describes the SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering Off the SUN2000

Powering Off the SUN2000


  • If two SUN2000s share the same AC switch on the AC side, power off the two SUN2000s.
  • After the SUN2000 powers off, the remaining electricity and heat may still cause electric shocks and body burns. Therefore, put on protective gloves and begin servicing the SUN2000 five minutes after the power-off.


  1. Run a shutdown command on the SUN2000 APP, SmartLogger, or NMS.

    For details, see the SUN2000 APP User Manual, SmartLogger1000 User Manual, SmartLogger2000 User Manual, or iManager NetEco 1000S User Manual.

  2. Turn off the AC switch between the SUN2000 and the power grid.
  3. Set the two DC switches to OFF.
Updated: 2019-08-02

Document ID: EDOC1100019925

Views: 14949

Downloads: 6713

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next