No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) User Manual

This document describes the SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Label Description

Label Description


Table 2-3 describes the labels on the SUN2000 enclosure and their meanings.

Table 2-3  Label description




Running warning

Potential hazards exist after the SUN2000 is powered on. Take protective measures when operating the SUN2000.

Burn warning

Do not touch a running SUN2000 because it generates high temperatures on the shell.

Delay discharge

  • High voltage exists after the SUN2000 is powered on. Only qualified and trained electrical technicians are allowed to perform operations on the SUN2000.
  • Residual voltage exists after the SUN2000 is powered off. It takes 5 minutes for the SUN2000 to discharge to the safe voltage.

Refer to documentation

Remind operators to refer to the documents shipped with the SUN2000.


Indicates the position for connecting the protection ground cable.

Operation warning

Do not remove the DC input connector when the SUN2000 is running.

SUN2000 serial number label

Indicates the SUN2000 serial number.


The SUN2000 is labeled with a nameplate on the side that contains the model information, technical specifications, and compliance symbols, as shown in Figure 2-8.

Figure 2-8  Nameplate of the SUN2000-42KTL
(1) Trademark and product model (2) Important technical specifications
(3) Compliance symbols (4) Company name and country of manufacture

The nameplate figure is for reference only. The actual nameplate prevails.

Table 2-4 describes the compliance symbols.

Table 2-4  Compliance symbols




CQC certification mark

The SUN2000 has been awarded the NB/T 32004 certification by China Quality Certification Center (CQC).

RCM certification mark

The SUN2000 complies with RCM certification standards.

TÜVRheinland certification mark

The SUN2000 complies with TÜVRheinland certification standards.

CE certification mark

The SUN2000 complies with Conformité Européenne (CE) certification standards.

Environmentally friendly use period (EFUP) label

The SUN2000 does not pollute the environment during the specified period.

EU waste electrical and electronic equipment (WEEE) label

Do not dispose of the SUN2000 as household garbage.

Updated: 2019-08-02

Document ID: EDOC1100019925

Views: 14820

Downloads: 6689

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next