No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) User Manual

This document describes the SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction

Introduction

Function

The SUN2000 is a three-phase grid-tied PV string inverter that converts the DC power generated by PV strings into AC power and feeds the power into the power grid.

Model

Figure 2-1 shows a model number of the SUN2000, using SUN2000-33KTL-A as an example.
Figure 2-1  Model number description
Table 2-1shows the rated output power and voltage.
Table 2-1  SUN2000 models and corresponding rated output power and voltage

Model

Rated Output Power

Rated Output Voltage

SUN2000-29.9KTL

29.9 kW

400 V

SUN2000-33KTL-A

30 kW

400 V

SUN2000-36KTL

36 kW

380 V/400 V/480 V

SUN2000-42KTL

42 kW

480 V

Network Application

The SUN2000 applies to grid-tied PV power systems for commercial rooftops and large power stations. Typically, a grid-tied PV power system consists of PV strings, grid-tied inverters, AC distribution units (ACDUs), and isolation transformer, as shown in Figure 2-2.
Figure 2-2  Network application
(A) PV string (B) SUN2000
(C) ACDU (D) Isolation transformer
(E) Power grid

Supported Power Grids

The SUN2000-29.9KTL/33KTL-A/36KTL supports the following power grid modes: TN-S, TN-C, TN-C-S, TT, and IT. The SUN2000-42KTL supports only IT grid mode.
Figure 2-3  Power grid modes
Download
Updated: 2019-08-02

Document ID: EDOC1100019925

Views: 14724

Downloads: 6689

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next