No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) User Manual

This document describes the SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL) in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the SUN2000

Removing the SUN2000

Before removing the SUN2000, disconnect both AC and DC connections. For processes of disconnecting, see Powering Off the SUN2000. After powering off the SUN2000, wait at least 5 minutes before performing operations on it.

Perform the following operations to remove the SUN2000:

  1. Disconnect all cables from the SUN2000, including RS485 communications cables, DC input power cables, AC output power cables, and PGND cables.
  2. Remove the SUN2000 from the mounting bracket.
  3. Remove the mounting bracket.
Download
Updated: 2019-08-02

Document ID: EDOC1100019925

Views: 15011

Downloads: 6715

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next