No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The CFCARD_FAILED alarm indicates that an operation on the CF card fails.


Alarm Severity Alarm Type


Equipment alarm


Name Meaning
Parameters 1

0x01: Creating the file system fails.

Impact on the System

This alarm does not have any impact on the system. Operations on the CF card cannot be successfully performed.

Possible Causes

Possible causes of this alarm are as follows:

  • Creating the file system of the CF card fails.
  • The file system of the CF card does not match.
  • The CF card hardware fails to initialize.


  1. On the U2000, check whether the CFCARD_FAILED alarm is reported.

    If... Then...
    The alarm is reported Replace the system control, cross-connect, and timing board. Then, check whether the alarm is cleared. If the alarm persists, contact Huawei technical support personnel to handle the alarm.
    The alarm is not reported No further action is required.

Related Information


Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75536

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next