No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LP_RFI

LP_RFI

Description

The LP_RFI alarm indicates a remote receive failure in the lower order path. This alarm is generated when a board detects that bit 4 of the V5 byte is 1.

Attribute

Alarm Severity Alarm Type

Minor

Communication alarm

Parameters

None.

Impact on the System

This alarm does not have any impact on the local end.

Possible Causes

The possible cause of the LP_RFI alarm is as follows:

The LP_RFI alarm is a correlated alarm. When the tributary board at the opposite end detects the BIP_EXC alarm, the tributary board sends the LP_RFI alarm to the local end.

Procedure

  1. Clear the BIP_EXC alarm. Then, the LP_RFI alarm is automatically cleared.

Related Information

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75019

Downloads: 136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next