No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The LP_RDI_VC3 is an alarm indicating a remote defect in the lower order path of the tributary board.


Alarm Severity Alarm Type


Communication alarm


When you view an alarm on the network management system, select the alarm. In the Alarm Details field display the related parameters of the alarm. The alarm parameters are in the following format: Alarm Parameters (hex): parameter1 parameter2...parameterN. For details about each parameter, refer to the following table.

Name Meaning

Parameter 1

Indicates the logical port number, and the value is always 0x01.

Parameter 2, parameter 3

Indicates the VC-3 path number that generates the alarm.

Impact on the System

When the LP_RDI_VC3 alarm occurs, the opposite station receives the TU_AIS, TU_LOP, LP_TIM, or LP_UNEQ alarm and then returns the LP_RDI_VC3 alarm (VC-12: V5[b8], VC3: G1[b5]) to the local tributary board.

Possible Causes

The possible causes of the LP_RDI_VC3 alarm are as follows:

  • The opposite station has received the TU_AIS, TU_LOP, LP_TIM, or LP_UNEQ alarm.

  • The receive part at the opposite station is faulty.
  • The transmit part at the local station is faulty.


  1. View alarms of the NE, and check whether there is the TU_AIS, TU_LOP, LP_TIM, or LP_UNEQ alarm in the corresponding path of the tributary board at the opposite station.

    If... Then...
    There is the TU_AIS, TU_LOP, LP_TIM, or LP_UNEQ alarm Refer to the corresponding section in this document to clear the alarm.
    There are no such alarms as the TU_AIS, TU_LOP, LP_TIM, or LP_UNEQ Proceed to the next step.

  2. If there is no alarm or the corresponding alarm is cleared at the opposite station, the LP_RDI_VC3 alarm persists. The tributary board is faulty. Replace the faulty board.

    Replacing the tributary board will interrupt services. This operation is of risk.

Related Information

Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 76252

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next