No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SYSLOG_COMM_FAIL

SYSLOG_COMM_FAIL

Description

The SYSLOG_COMM_FAIL alarm indicates that communication between the NE and the Syslog server fails.

Attribute

Alarm Severity Alarm Type
Major Equipment alarm

Parameters

When you view an alarm on the network management system, select the alarm. In the Alarm Details field display the related parameters of the alarm. The alarm parameters are in the following format: Alarm Parameters (hex): parameter1 parameter2...parameterN. For details about each parameter, refer to the following table.

Name Meaning

Parameter 1, Parameter 2, Parameter 3, Parameter 4

Indicates the address of the Syslog server.

Parameter 5

Indicates the communication exception type.

  • 0x01: The connection between the NE and the Syslog server is interrupted.
  • 0x02: The session between the NE and the Syslog server is abnormal.

Impact on the System

When this alarm is generated, it indicates that the connection between the NE and the Syslog server is interrupted, or the session between the NE and the server is abnormal.

Possible Causes

The possible cause of the SYSLOG_COMM_FAIL alarm is as follows:

In the TCP mode, the connection between the NE and the Syslog server is interrupted or the session between the NE and the server is abnormal.

Procedure

  1. Rectify the fault on the link between the NE and the Syslog server or rectify the fault of the protocol.
    The alarm is cleared automatically.

Related Information

None.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75961

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next