No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DBMS_PROTECT_MODE

DBMS_PROTECT_MODE

Description

The DBMS_PROTECT_MODE alarm indicates that the system database is in protected mode. To prevent the service configuration data in the database from being illegally overwritten, the database changes to the protection mode.

Attribute

Alarm Severity Alarm Type

Critical

Processing alarm

Parameters

None.

Impact on the System

An exception occurs in the system.

Possible Causes

The possible cause of this alarm is as follows:

  • The system control unit does not properly function and is repeatedly reset.

Procedure

  1. Replace the system control, cross-connect, and timing board at the local end, and apply the service configuration data again on the U2000.

Related Information

None.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75372

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next