No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EDTMP

EDTMP

Description

The EDTMP is a performance event indicating the laser temperature. It contains the EDTMPMAX, EDTMPMIN, and EDTMPCUR, which respectively indicates the maximum value, minimum value, and current value during a period of time.

Attribute

Performance Event ID Performance Event Type

EDTMPMAX: 0x82

Equipment function

EDTMPMIN: 0x83

EDTMPCUR: 0x84

Impact on System

None.

Generation Principle and Possible Causes

This performance event is detected by hardware detecting circuit and then the result is calculated by the software for conversion. If the performance is not in the normal range, the laser module might be faulty.

Related Alarms

Alarm Name

Correlation

PUM_TEM_ALM

Working temperature of the pump laser exceeds the threshold. This alarm is generated when the pump laser operating temperature of the optical amplifier unit exceeds the threshold.

Procedure

  1. If any alarm occurs, use the method of the related alarm to clear it.

Related Information

None.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75714

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next