No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SWDL_COMMIT_FAIL

SWDL_COMMIT_FAIL

Description

The SWDL_COMMIT_FAIL alarm indicates that the commit operation on the NE fails. This alarm is reported when the commit operation fails in the package loading or package diffusion.

Attribute

Alarm Severity Alarm Type

Minor

Processing alarm

Parameters

None.

Impact on the System

The SWDL_COMMIT_FAIL alarm occurs only on double-area boards. The consequence is that the software versions in the two areas of the double-area board are inconsistent.

Possible Causes

The possible cause of the SWDL_COMMIT_FAIL is as follows:

  • During package loading or package diffusion, the dual-partition board fails in copying the new software from one partition to the other.

Procedure

  1. Check whether the board is not online.
  2. Check whether the loaded package is correct.
  3. Perform the package loading or package diffusion again on the NE where the alarm is reported.

Related Information

None.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 83268

Downloads: 156

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next