No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DB_UNSAVE

DB_UNSAVE

Description

The DB_UNSAVE alarm indicates that the configuration data in the database is not permanently stored in the NVRAM, DRDB, or FDB storage area. This alarm is reported if the database configuration changes.

Attribute

Alarm Severity Alarm Type

Critical

Processing alarm

Parameters

When you view an alarm on the network management system, select the alarm. In the Alarm Details field display the related parameters of the alarm. The alarm parameters are in the following format: Alarm Parameters (hex): parameter1 parameter2...parameterN. For details about each parameter, refer to the following table.

Name Meaning

Parameter 1

0x01: The database is in the package loading prohibition state. That is, the database is not saved.

Impact on the System

If this alarm is generated and the system is reset, new configurations cannot be permanently stored.

Possible Causes

Possible causes of this alarm are as follows: Between the package loading activation and the end of the commit operation, the set-forbidswitch command is used to enable the configuration, and the configuration changes.

Procedure

  1. Commit the package loading, Check whether the DB_UNSAVE alarm is cleared.
  2. If the alarm persists, contact Huawei technical support engineers to handle the alarm.

Related Information

None.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 74835

Downloads: 136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next