No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SSL_CERT_DAMAGED

SSL_CERT_DAMAGED

Description

The SSL_CERT_DAMAGED is an alarm indicating that a user-customized SSL certificate file is damaged. This alarm is reported to notify the user to rectify the SSL certificate file and is cleared after the file is rectified.

Attribute

Alarm Severity Alarm Type

Critical

Security alarm

Parameters

None

Impact on the System

When this alarm occurs and the SSL certificate file is not rectified in time, the NE will be unreachable to the NMS in SSL mode after the system control board of the NE is reset.

Possible Causes

Cause: The user-customized SSL certificate file is damaged.

Procedure

  1. Cause: The user-customized SSL certificate file is damaged.
    1. Log in to the U2000, and load and activate the customized SSL certificate file again. For details, see the section about loading board-level software in the iManager U2000 Product Documentation.

Related Information

None

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 75655

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next