No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SEC_RADIUS_FAIL

SEC_RADIUS_FAIL

Description

The SEC_RADIUS_FAIL alarm indicates that the number of consecutive RADIUS authentication failures is too great. This alarm is reported when the number of consecutive RADIUS authentication failures reaches five. (If the interval between two RADIUS authentication failures is less than 180 seconds, they are considered as consecutive RADIUS authentication failures.)

Attribute

Alarm Severity Alarm Type

Major

Equipment alarm

Parameters

When you view an alarm on the network management system, select the alarm. In the Alarm Details field display the related parameters of the alarm. The alarm parameters are in the following format: Alarm Parameters (hex): parameter1 parameter2...parameterN. For details about each parameter, refer to the following table.

Name Meaning

Parameter 1, Parameter 2

Indicate the user name (16 bits in length).

Impact on the System

Logins to an NE fail.

Possible Causes

Possible causes of the SEC_RADIUS_FAIL alarm are as follows:

  • The usage period of the account expires.
  • The password, access policy, or shared key of the account is changed.
  • There are unauthenticated login attempts on the RADIUS server.

Procedure

  1. Check whether the usage period of the account expires.

    If... Then...

    The usage period of the account expires

    Use a valid account to log in to the NE. Check whether the alarm is cleared. If the alarm persists, go to the next step.

    The usage period of the account is still valid

    Go to the next step.

  2. Check whether the password or access policy of the account is changed on the RADIUS server.

    If... Then...

    The password or access policy of the account is incorrect

    Correct the password or access policy of the account. Check whether the alarm is cleared. If the alarm persists, go to the next step.

    The password and access policy of the account are correct

    Go to the next step.

  3. Check whether the shared key for the NE (or GNE) and the RADIUS server is set correctly.

    If... Then...

    The shared key is set incorrectly

    Set the shared key correctly. Check whether the alarm is cleared. If the alarm persists, go to the next step.

    The shared key is set correctly

    Go to the next step.

  4. Check whether there are unauthenticated login attempts on the RADIUS server.

    If... Then...

    There are unauthenticated login attempts on the RADIUS server

    Eliminate the source that initiates the unauthenticated login attempts. Check whether the alarm is cleared. If the alarm persists, go to the next step.

    There is no unauthenticated login attempt on the RADIUS server

    Contact Huawei technical support engineers to handle the alarm.

Related Information

None.

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 74951

Downloads: 136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next