No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The SWDL_ACTIVATED_TIMEOUT alarm indicates that during software package loading or package diffusion, the NE does not perform the commit operation in a certain time after the board is activated.


Alarm Severity Alarm Type


Processing alarm



Impact on the System

The NE does not perform commit for a long time, which causes the software in the two areas of the double-area boards on the NE inconsistent. Once a board becomes abnormal, rollback occurs on the entire NE.

Possible Causes

The possible cause of the SWDL_ACTIVATED_TIMEOUT alarm is as follows:

  • During the 30 minutes after the board is activated, the NE does not perform commit.


  1. The software package loading or package diffusion is not complete. Proceed with the commit operation.

Related Information


Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 83121

Downloads: 154

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next