No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 500 550 580 V100R008C50 Alarms and Performance Events Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SOFTWARE_UNCOMMIT

SOFTWARE_UNCOMMIT

Description

The SOFTWARE_UNCOMMIT alarm indicates that the board software is unauthorized. This alarm is reported when the software version of a board is later than that of the system control board and is unauthorized.

Attribute

Alarm Severity Alarm Type
Major Equipment alarm

Parameters

None

Impact on the System

The board runs improperly.

Possible Causes

Cause 1: The board software is unauthorized.

Procedure

  1. Load the software license to the board.

Related Information

None

Translation
Download
Updated: 2019-01-21

Document ID: EDOC1100020975

Views: 74888

Downloads: 136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next